冷再生機主要用于瀝青混凝土路面的銑刨以及添加瀝青、水等材料后的舊瀝青路面的再生，也可用于公路、城鄉道路、機場、碼頭、停車場等工程的基礎建設。當然使用過程中冷再生機對路面的一些問題要了解到才行！

　　Cold regeneration is mainly used for the milling of asphalt concrete pavement and the regeneration of old asphalt pavement after adding asphalt, water and other materials. It can also be used for the infrastructure construction of roads, urban and rural roads, airports, docks, parking lots and other projects. Of course, in the process of using cold vitality to understand some of the problems on the road!

　　冷再生機到現有的道路施工中使用非常的頻繁，因為當道路過了一段時間之后，就會產生深層裂縫、坑洞及擁包等損壞，從而導致道路使用性能的嚴重下降。因此，需要進行結構性加強，以便從根本上恢復乃提高道路的行駛性能。作為一種經濟性的道路維修改造方法，冷再生機的主要優點是地利用舊材料使現有鋪層得到加強，其次有工期短、對公共交通干擾小等優點。

　　Cold regeneration is used very frequently in the existing road construction, because when the road passes for a period of time, it will produce deep cracks, holes and wrap damage, which leads to a serious decline in the performance of the road. Therefore, it is necessary to carry out structural strengthening in order to fundamentally restore and even improve the driving performance of the road. As an economical road maintenance and reconstruction method, the main advantage of cold regeneration is to use 100% of the old materials to strengthen the existing paving, followed by a short period of time, less interference to public traffic and other advantages.

　　現有的路面銑刨到確定的深度，以便獲得現有鋪層材料。然后，通過加入粘結劑對這些材料進行再生處理，從而獲得一個得到加強的新鋪層。整個再生過程是一個一次性的過程。這一工藝適用于維修或升級改造從無鋪面的礫石路，到承受重負荷的干線公路的大范圍的道路，這點很多冷再生機租賃廠家都會重視到這塊。

　　The existing pavement is milled to a defined depth in order to obtain the existing paving material. These materials are then regenerated by adding a binder to obtain a new reinforced layer. The whole regeneration process is a one-time process. This process is suitable for repairing or upgrading a wide range of roads, from unpaved gravel roads to heavy load mainline roads, which are valued by many cold and regenerative leasing companies.

　　冷再生機租賃人員認為使用機器進行工作的時候需要進行對再生混合料拌，應立即用平地機初步整形。在直線和不設超高的平曲線段，平地機由路肩向路中心進行刮平。很多時候都會面對這點，對路面的整形過程中應及時粗細料離析現象。既由人工配合機械把大塊沒有破碎掉的舊路料掉。

　　Cold regeneration lease personnel consider that the use of machinery to work when the need for the regeneration of the mixture, should immediately use a grader preliminary shaping. In the straight line and the flat curve section without ultra high, the grader is scraped from the shoulder to the center of the road. Many times will face this, on the road surface in the process of shaping should be timely elimination of coarse and fine material segregation phenomenon. Both manual and mechanical removal of large chunks of unbroken old road-material.

　　此外，從節約能源和運輸費用角度來看，采用泡沫瀝青進行現場冷再生是目前瀝青路面回收再利用比較合適的工藝方式。采用瀝青路面冷再生技術，能夠節約大量的瀝青、砂石等原材料，同時有利于處理廢料、保護環境。盡可能多地利用現有路面材料進行公路養護維修和改造，是符合可持續發展要求的。

　　In addition, from the point of view of saving energy and transportation cost, using foamed asphalt for on-site cold regeneration is a more suitable process for asphalt pavement recycling. Using cold regeneration technology of asphalt pavement can save a lot of asphalt, sand and other raw materials, and at the same time help to deal with waste materials and protect the environment. It is consistent with the requirement of sustainable development to use existing pavement materials as much as possible for road maintenance and renovation.

　　冷再生機對路面的一些問題要了解到的相關 內容便是如此了，如果您在使用期間出現問題卻不知道怎么找原因的話，歡迎您隨時來網站www.lvuee.com進行相關的咨詢。

　　Cold and vitality of some problems to understand the relevant content of the road is so, if you do not know how to find the cause of the problem during the use of words, you are welcome to the website www.lvuee.com for relevant consultation.